Jinan Jinchangtai Industry And Trade Co., Ltd

Call us toll free:
+0086-531-61300169
Home Products printing material Silicone flexographic printing rubber roller use for for food processing equipment

Products

Silicone flexographic printing rubber roller use for for food processing equipment
Silicone flexographic printing rubber roller use for for food processing equipment Silicone flexographic printing rubber roller use for for food processing equipment Silicone flexographic printing rubber roller use for for food processing equipment Silicone flexographic printing rubber roller use for for food processing equipment Silicone flexographic printing rubber roller use for for food processing equipment

Silicone flexographic printing rubber roller use for for food processing equipment

Product ID : RR-L-03
Product Tags :
Product Attributes :

Silicone flexographic printing rubber roller use for for food processing equipment


Color: Black,red,white,and so on

Diameter: 10MM-670MM

Length: 50MM-8200MM

Material: NBR,Silicone,EPDM,polyurethane etc

Application: Industrial, printing and packaging machines

Hardness: 45A-100D

Tolerance: 0.05mm

Temperature: Max.300degree

Roll core: stainless steel,45#steel or 20#steel or 5# aluminum seamless pipe


Product Description



2-08-151284908_副本.jpg



 Silicone flexographic printing rubber roller use for for food processing equipment

Product Description

 1. Features of rubber roller

1.Ozone and Chemical resistance  

2.Anti-aging, good flexibility, good elasticity

3.Excellent oil resistance 

4.Clean and healthful for many food and medical applications

2.Our rubber roller

Color: Black,red,white,and so on

Diameter: 10MM-670MM

Length: 50MM-8200MM

Material: NBR,Silicone,EPDM,polyurethane etc

Application: Industrial, printing and packaging machines

Hardness: 45A-100D

Tolerance: 0.05mm

Temperature: Max.300degree

Roll core: stainless steel,45#steel or 20#steel or 5# aluminum seamless pipe


Industrial-Rubbe.png

.jpg

 

Advantages

 

Advantages of our rubber roller

 

A.Raw materials :

1) Base roller:

We are using  #45 steel , #201stainless steel #304stainless steel and 5# aluminum seamless pipe as the base roller.And we are adopting a reasonable thickness base roller according to customer’s drawing. Some manufacturers will reduce the thickness of the steel pipe in order to get the price advantage.Such roller can’t meet the standards.But we won’t do that.

 

2)Rubber:
Our rubber are all imported from Germany or the US and then we mix them in our factory.The rubber coating technical we are using is winding technical. we casting the rubber on the base roller layer by layer and then vulcanize it to make the green rubber into mature rubber.

While other manufacturers are using sheet coating technical,and the rubber is cold in processing and will cause adhesion problems easily.

pk .png

B. Production process:

1) Hot charging technicals:

Adopt hot charging technicals to install the shaft head, and then weld after contraction to ensure the quality of shaft installation.While other supplier are welding the shaft head directly.

2)Dynamic balancing:

We will do 3 times of dynamic balancing test in the process of production of each rubber roller,which will ensure the using effect. In general,If it can displayed within 10g on the dynamic balancing device, it is called dynamic balancing. But we can do less than 2g.

8.webp.jpg

 3)Testing by making small sample before mass production

We will make a small sample before the official production, after vulcanization, 24 hours later we will check the hardness, color, and Impurity situation. We will control the hardness tolerance within 3degree. If it is not qualified we will change the formulated immediately and to make the sample again till all the data reach the customer’s request.

.jpg

C. Quality control Department

Using all-imported laser tester to ensure that the geometric size and the accuracy of the roller can reach 0.01 mm; 

10.webp.jpg

 

Product Pictures

_12_.jpg

IMG_8372_.jpg

  

Company Information

  (1).jpg

 (2.1).jpg

 

FAQ
 

1.    When can I get the quotation?

We usually quoted within 24 hours after receiving your inquiry. If you are very urgent to get the price, please call us or tell us in your email, so that we can regard your inquiry priority.

2.    How should I place the order?

Please show us your drawing, or let us know your request, and then we will provide you drawing for confirmation.Or you need rollers for famous brand machine ,we normally have its drawing,so you just need to tell us your machine model number.

3.    What’s your MOQ basis?

1 piece or 1 set,it depends on your actual requirement.

4.    What about the lead time for production?

Usually 20-25days,but it also depends on the order quantity and the type of our products. 

 

 


Online Inquiry